Encountering Windows System Error Code ERROR_58 can be frustrating, especially when you’re in the middle of important work. This error typically relates to network or service issues that prevent certain Windows functionalities from running smoothly. Don’t worry—this guide will walk you through detailed, easy-to-follow steps to help you fix ERROR_58 effectively, even if you’re not a tech guru.
What is Windows System Error Code ERROR_58?
Before jumping into the fixes, let’s understand what ERROR_58 means:
- Error Description: The specified server cannot perform the requested operation.
- Common Causes: This usually indicates a problem with the Windows networking services, such as issues with network drivers, corrupted system files, or disabled services necessary for network operations.
Knowing the root cause helps in applying the right fixes and preventing this error from popping up again.
Step 1: Restart Your Computer and Network Devices
Sometimes, a simple restart can resolve temporary glitches that trigger ERROR_58.
- How to do it:
- Save all your work and close programs.
- Click Start > Power > Restart.
- Restart your router and modem by unplugging them for at least 30 seconds, then plugging them back in.
Why this works: It refreshes your system and network connections, clearing out errors caused by outdated configurations or temporary bugs.
Step 2: Run Windows Network Troubleshooter
Windows has built-in troubleshooters to automatically detect and fix network-related issues.
- How to run:
- Press
Windows + Ito open Settings. - Go to Network & Internet.
- Click Status on the left pane.
- Scroll down and select Network troubleshooter.
- Follow on-screen instructions.
- Press
Tip: This tool can identify if network services tied to ERROR_58 are disabled or malfunctioning.
Step 3: Check and Restart Key Network Services
ERROR_58 often arises from essential Windows services being stopped or malfunctioning. The two main services to check are:
- Server Service
- Workstation Service
How to Check and Restart Services:
- Press
Windows + R, typeservices.mscand hit Enter. - Scroll down to Server.
- Right-click Server, choose Properties.
- Ensure Startup type is set to Automatic.
- If the service is stopped, click Start.
- Repeat for Workstation service.
Pro tip: Restarting these services can reinitialize your network sharing capabilities and fix ERROR_58.
Step 4: Update or Rollback Network Drivers
Outdated or corrupt network drivers can lead to ERROR_58. Updating or rolling back drivers frequently resolves the issue.
How to Update Network Drivers:
- Press
Windows + Xand click Device Manager. - Expand Network adapters.
- Right-click your network device, select Update driver.
- Choose Search automatically for updated driver software.
- Follow prompts.
How to Rollback Drivers (If Error Started After Update):
- Follow steps to open Device Manager > Network adapters.
- Right-click your adapter, select Properties.
- Go to the Driver tab.
- Click Roll Back Driver (if available).
- Restart your computer.
Step 5: Run System File Checker (SFC) and DISM
Corrupted Windows system files can cause ERROR_58. Running SFC and DISM scans helps repair these files.
How to run SFC:
- Press
Windows + Xand choose Windows Terminal (Admin) or Command Prompt (Admin). -
Type:
sfc /scannow
- Press Enter.
- Wait until the process completes (may take 15-20 minutes).
How to run DISM:
If problems persist after SFC scan, run DISM:
-
In the same terminal window, type:
DISM /Online /Cleanup-Image /RestoreHealth
- Press Enter.
- Wait for the process to complete.
Step 6: Check Network Configuration with Command Prompt
Incorrect TCP/IP or Winsock settings may cause ERROR_58. Resetting these can restore network functionality.
Steps to reset TCP/IP and Winsock:
- Open Command Prompt as administrator.
-
Type each command below, pressing Enter after each:
netsh winsock reset
netsh int ip reset
ipconfig /release
ipconfig /renew
ipconfig /flushdns - Restart your computer.
Step 7: Verify Firewall and Antivirus Settings
Sometimes, third-party antivirus or firewall settings block network services, leading to ERROR_58.
- Temporarily disable firewall and antivirus.
- Check if the error persists.
- If error disappears, add exceptions or whitelist necessary programs/services in your firewall/antivirus settings.
Step 8: Perform a System Restore
If ERROR_58 started appearing recently, you can roll back your system to a date before the error occurred.
How to perform System Restore:
- Press
Windows + Sand type Create a restore point. - Click to open System Properties.
- Under System Protection, click System Restore.
- Follow the wizard to choose a restore point.
- Confirm and restore.
Final Thoughts
Fixing ERROR_58 is usually a matter of carefully checking network-related services, updating drivers, and repairing system files. By following the steps above, you should see your Windows environment return to normal—no more interruptions or error messages!
If the issue persists despite all efforts, consider reaching out to Microsoft Support or a trusted IT professional for deeper diagnostics.
Summary of Steps to Fix Windows System Error Code ERROR_58:
- Restart your computer and network devices.
- Run Windows Network Troubleshooter.
- Check and restart Server and Workstation services.
- Update or rollback network drivers.
- Run System File Checker (SFC) and DISM commands.
- Reset TCP/IP and Winsock configurations.
- Review firewall and antivirus settings.
- Perform a System Restore if needed.
Thank you for reading! If this guide helped solve your ERROR_58 problem, please share it with friends or leave a comment below. Your support helps us create more useful tech guides that anyone can follow.
Happy troubleshooting and stay connected!
